Local names:
English (Papua New Guinea brown wattle,New Guinea wattle,New Guinea brown wattle,hickory wattle,brush iron bark wattle,brown wattle,brown salwood,black wattle), Trade name (brown salwood)
Acacia aulacocarpa is a shrub to a slender, large tree, 3-40 m tall; trunk up to 1 m in diameter, sometimes fluted. Bark hard, sometimes brownish, about 1 cm thick, longitudinally fissured, peeling in long strips. Phyllodes straight or falcate, acute or subacute, 5-15 x 0.6-3.5 cm, 3-12 times as long as wide, glabrous, greyish-green or dull grey, with 3 prominent longitudinal veins somewhat crowded towards lower margin at base, usually not yellowish, and with many parallel, not anastomosing, secondary veins, pulvinus, 4-6 mm long, with an ellipsoid basal gland. Inflorescence a spike, 2-6 cm long, yellow, 1-3 together, peduncle 2-8 mm long, scurfy; flowers pentamerous, bisexual, calyx broadly cupular, 0.5-1 mm long, membranous, with broad, obtuse, scurfy lobes 0.2-0.3 mm long, lobed to the middle, glabrous, 2-3 times as long as the calyx; stamens many, 2.5-3 mm long; ovary 0.5 mm long, shortly pubescent or scurfy. Pod oblong, up to 10 x 2 cm, light brown, coriaceous to subwoody, with prominent obliquely transverse, dark brown veins, glabrous, often twisted when old. Seed elliptical-oblong, 5-8 x 2.5-3.5 mm, shiny black, transverse or oblique in pod, with pale terminal aril. Two varieties are recognised. Var fruticosa, a bushy shrub to 3 m tall and var aulacocarpa, usually a tree 10-20 m tall but ranges from a shrub of 4 m on xeric sites to a large tree to 40 m tall in tropical rainforest. The generic name ‘acacia’ comes from the Greek word ‘akis’, meaning a point or a barb. The species name ‘aulacocarpa’ is derived from the Greek 'aulakos' (a furrow) and 'carpos' (fruit), referring to the prominent furrowing and thickened transverse bands on the pods.
Ecology
The main occurrence of A. aulacocarpa is in warm to hot humid and sub-humid zones of the tropics and subtropics, at the latitudinal range 6-31 deg. C. It can tolerate only very mild frost. Found in a diverse range of vegetation associations, mainly open forest, and is one of the few acacia species extending into rainforest. The species has been described as an early secondary species, ‘proclimax’ species or secondary species dominating disturbed or successional forests and ‘permanent gap’ conditions such as steep, unstable slopes and watercourse margins. It grows in a wide topographical range including undulating highlands, ridges, and steep rocky slopes, as well as on the flat and gently undulating terrain of coastal plains and foothills. The soils are freely to imperfectly drained, usually acid or very acid and of low fertility.
Native range
Australia, Indonesia, Papua New Guinea
Tree management
In general, the seedlings are ready for transplanting 3-4 months after sowing. A spacing of 3-4 x 3-4 m is considered suitable for firewood and pulpwood plantations. A. aulacocarpa competes well with weeds, including Imperata cylindrica. In plantations with 2-3 x 2-3 m spacing, it will totally suppress the weed within 2-3 years. However, weed control is necessary in the first 2 years to help establishment. An 8-10-year rotation is recommended for pulpwood plantations, and a 15-20-year rotation for saw logs. Trees attain 12-16 m in height and 11-14 cm in diameter in 4 years. An evergreen species, the main and lateral shoots grow almost throughout the year, but growth may stagnate during the very hot and dry season. The tendency of A. aulacocarpa to have a fluted stem may reduce its value for purposes such as veneer. Selection of a suitable provenance will be necessary to obtain optimum results.
Seed storage behaviour is orthodox. There are 40 000-80 000 viable seeds/kg.
The main occurrence of A. aulacocarpa is in warm to hot humid and sub-humid zones of the tropics and subtropics, at the latitudinal range 6-31 deg. C. It can tolerate only very mild frost. Found in a diverse range of vegetation associations, mainly open forest, and is one of the few acacia species extending into rainforest. The species has been described as an early secondary species, ‘proclimax’ species or secondary species dominating disturbed or successional forests and ‘permanent gap’ conditions such as steep, unstable slopes and watercourse margins. It grows in a wide topographical range including undulating highlands, ridges, and steep rocky slopes, as well as on the flat and gently undulating terrain of coastal plains and foothills. The soils are freely to imperfectly drained, usually acid or very acid and of low fertility.
Propagation is mainly by seed, although cuttings and air layering can also be used. Seeds have a hard coat, which requires heat treatment or nicking to break dormancy. Immersing them in boiling water for 1 minute is a suitable treatment, or alternatively pouring boiling water over them and letting them soak in it. Mature seeds germinate readily. Treated seeds are sown in germination beds, and seedlings are transplanted into polythene bags when they reach the 2-leaf-pair stage. Seeds can also be sown straight into polythene bags. Young seedlings should initially be kept at 50% sunlight, but this can be increased to 70% once they have been established. Excess shading often results in attack by mildew and other fungi in damping off. Adult foliage is reached about 6 weeks after germination.
A popular tree species in the reforestation of poor soils.
The potential for fodder production is limited; the phyllodes are rather unpalatable to stock, being eaten only during very dry periods, and the predicted in vivo digestibility is low, 33%.
The wood has an energy value of 21600 kJ/kg and is suitable for firewood. Charcoal made from A. aulacocarpa wood has a density of 500 kg/cubic metre at 12.5% moisture and an energy value of 37 100 kJ/kg.
Fibre: Excellent potential as a source of fibre for pulping and paper-making industries, producing one of the strongest bleached kraft pulps among acacias.
Timber: The sapwood of A. aulacocarpa is narrow, creamy yellow to straw-coloured, distinct; heartwood pale olive-brown to grey-brown, often attractively streaked with grey bands. The heartwood is reddish-brown, hard, heavy (600-800 kg/cubic metre basic density), moderately durable and tough. Used as a construction timber, for furniture and cabinetwork, flooring, boat building, tool handles, boxes and crates, joinery and turnery.
Shade or shelter: The light to moderate crown makes A. aulacocarpa useful for shade planting.
Tannin or dyestuff: The inner bark may be used for tannin production.
Nitrogen fixing: A. aulacocarpa is an evergreen species that fixes atmospheric nitrogen.
Ornamental: The tree is occasionally planted as an ornamental.