Local names:
English (African whitewood), Trade name (samba,obeche,African whitewood)
Triplochiton scleroxylon is a large deciduous forest tree commonly attaining 45 m in height and 1.5 m in diameter. The boles of mature trees are often heavily buttressed but usually free from branches. Bark ashy grey or yellowish-brown, usually smooth in young trees but scaly and with fissures in older ones. Slash fibrous, creamy white to pale yellow. Young trees have a cylindrical-shaped crown bearing foliage almost to the ground; self-pruning gradually modifies this to a high, dense, circular crown, which finally becomes flat-topped when the trees are old. Leaves 10-20 cm long and broad, palmate with 5-7 lobes, cordate and 5-7 nerved at base, lobes broadly ovate, triangular or oblong, rounded or obtusely acuminate at the apex; glabrous; stalk 3-10 cm long. Leaves of saplings and coppice shoots often larger and more deeply lobed than the crown leaves. Inflorescence a paniculate cyme, 4-5 cm long, with dichotomous branching. Flower saucer-shaped; petals white, red-purple at base, obovate, densely hairy, about 1 cm long and broad; stamens 30-46; carpels 5. Fruits brown to reddish-brown, composed of 1-5 winged carpels, each carpel more or less rhombic; measuring 0.8-2 cm across the diagonal, wing 4-6 cm long, 1.2-2 cm broad, oblong-obovate with a thickened margin. Mericarp may be densely or sparsely pilose, either from the point of attachment to the slit at the apex or only on the slit and at the point of attachment. The generic name is derived from triplostichus (in or having 3 rows) and –chiton (Greek for covering. The specific name is derived from sclero- (Greek for hard) and xylon (Greek, relating to wood).
Ecology
Within its natural limits, T. scleroxylon is found mainly in forest at low and medium altitudes in the monsoon equatorial forest belt. High mean temperatures that vary relatively little throughout the year characterize this belt. The tree is found in the semi-deciduous moist forest, in the transition zone between forest and moist savannah, and in scattered outliers where local topography favours a closed forest community. Also characteristic and frequent in drier and more disturbed types of forest. Trees occur naturally from Guinea to Democratic Republic of Congo and from Gabon to Nigeria. Throughout its natural range there is always a marked dry period between December and April. T. scleroxylon is referred to as a pioneer species, and it has been suggested that shifting cultivation in West Africa has influenced the natural distribution. Trees normally occur in clusters of 10 or more and isolated trees are very rare.
Native range
Benin, Cameroon, Central African Republic, Congo, Cote d'Ivoire, Democratic Republic of Congo, Equatorial Guinea, Ghana, Guinea, Liberia, Nigeria, Sierra Leone, Togo
Tree management
Prompt removal of logs from the forest, as well as conversion, is reported to be essential, as the species is susceptible to insect and fungal attack.
Orthodox seed storage behaviour. Seeds from mature fruit tolerate desiccation to 5-10% mc, but viability is lost after 5 years of subsequent storage at 0-5 deg. C. Fruit (not seeds) harvested at 70% mc tolerates desiccation to 11.5% mc, but further desiccation to 7.4% mc reduces viability to 48%; little (5%) loss in viability after 8 months of hermetic storage at 6 deg. C with 7.4% mc, only 28% germination when stored hermitically at 6 deg. C with 13% mc, and no loss in viability when stored hermetically at 18 deg. C with 12.3% mc after the same period of time.
Within its natural limits, T. scleroxylon is found mainly in forest at low and medium altitudes in the monsoon equatorial forest belt. High mean temperatures that vary relatively little throughout the year characterize this belt. The tree is found in the semi-deciduous moist forest, in the transition zone between forest and moist savannah, and in scattered outliers where local topography favours a closed forest community. Also characteristic and frequent in drier and more disturbed types of forest. Trees occur naturally from Guinea to Democratic Republic of Congo and from Gabon to Nigeria. Throughout its natural range there is always a marked dry period between December and April. T. scleroxylon is referred to as a pioneer species, and it has been suggested that shifting cultivation in West Africa has influenced the natural distribution. Trees normally occur in clusters of 10 or more and isolated trees are very rare.
Marcotting can be used to raise ramets of T. scleroxylon as successfully as by using cuttings from managed stock. Successful rooting of cuttings can be obtained only from young, leafy stem material. This makes the use of high humidity propagators essential.
Fibre: Although the main uses of T. scleroxylon are as timber, the wood is also used for fibreboard and particleboard.
Timber: Heartwood and sapwood are not clearly differentiated, and the latter is reported to be up to 15 cm wide. Texture usually varies from coarse to moderately fine and even with a natural sheen on the surface. There is usually an unpleasant odour when wood is freshly cut, but the smell disappears after it is seasoned. The wood dries very rapidly and readily, with little or no degradation. Lumber must be stacked carefully to permit good air circulation. Distortion and knot splits may occur during drying. The heartwood is reported to be resistant to preservative treatment. The sapwood is permeable. The material has a slight abrasive effect. It is reported to respond well to hand and machine tools in moulding and most operations. Cutting edges should be kept very sharp when working end-grain material since it has a tendency to crumble and chip at tool exits. Carving characteristics are reported to be generally good. The wood is reported to have good gluing qualities, and gluing is preferable over nailing and screwing for jointed work. Staining properties are reported to be satisfactory, but the surface requires careful filling. Obeche is recognized as a very important source of timber for export. It is one of the three timber species (others are Entandrophragma cylindricum and Lophira alata) that have traditionally accounted for more than half of timber supply in Cameroon (Wunder 2003.). It is reported to be readily available in both veneer and lumber forms. Some of the uses include blockboard, boat and ship building, boxes and crates, cabinet making, plywood, furniture components, marquetry, moldings, bedroom suites, building materials, casks, chests, cutting surfaces, excelsior, furniture, interior construction, radio, stereo and TV cabinets.